Projects

This is a Continuous Roofline Barn Style, All Vertical Metal Building. As you can see, there are purlins on the roof, sides and ends in which to attach the sheet metal vertically. This makes for a very strong building. This structure is 48' wide x 40' long x 12' tall at the eave and 9' tall at the low side of the lean-to. This building was upgraded with 26 gauge PBR panels.

The main portion of the building is 24' wide and has 2 - 12x40 lean-to's on each side making up the 48' in width. The entire building is 40' long. 1 Lean-to is fully enclosed with an insulated roof and the other Lean-to is completely open. There are some internal legs that separate the center building with the lean's.

With 24'wide x 35' long x 12' eaves, this All-Vertical Metal building was built with additional trusses to support a hefty snow-load. As you can see from the construction pictures, we are closer to 2' on center than 4 or 5' on center which is more common. If you are in an area where there is lots of snow, let us know and we will make sure to strengthen your building to meet your City or County codes. We also offer Engineered Drawings and Calculations for permitting.

30' wide x 100' long x 12' eaves with (4) 20'wide x 10' tall headers. Vertical Style Roof, Horizontal Siding, mobile home anchors for Gravel surface & to protect and offer a wind certification. This Metal Building can have multiple uses. A few examples include: Vehicles, Animal Covers, Farm Equipment, Military Equipment or RV's & Boats.